Web Loading..Wait

WL V913 Camera unit-Upgrade parts

Many friends want to have a camera on their WL V913 helicopter,Now Dream come true!Click for details

Upgrade camera unit for WL V913,.Today only $39.99 usd ,Freeshiping worldwide
(Buy More Save More)
Usual price:$69 NO Free Shipping worldwide
Today only $39.99 Free Shipping worldwide

 

A).Product include:Buttom frame*1,Data usb line*1,Camera(Contains the Memory card-130W pixels)*1,Charger usb*1,Charger*1


B).How to install the camera unit for the wl v913 helicopter?

 1.Connect the Camera onto the Buttom frame

2.Just like the picture to connect.

3.When connect it,You must fasten it.like the picture said below

4.Put the camera unit onto the buttom of helicopter

5.Here you can Use the wire or line  Fastened the camera unit onto the buttom of the helicopter。Specific location recommended rearward.This is conducive to maintaining the balance of the aircraft flight

6.Finished,Here you can Adjust the shooting angle of the camera


C)How to Use the camera?

C-1).Camera function Introduction:

A)1300,000 pixels, HD video recording, manual camera.
B)2GB memory Card , can camera about 50 minutes
C)Configure 200mah polymer battery energy.
D)Configuration multipurpose charger, can be used independently, also it is very easy to carry.

  This camera unit has 2GB memory ,When you make vedio,it can use the 1.7~1.8GB Memory. the left memory can continue to take photo (when take photo you need to click the button on the camera). also this camera has 200mah battery inside the camera unit,you can use USB to connect the camera unit ,then can Charge .Or You can Put 1x 1.5V AA Battery into the charger( Need for high-capacity battery),then use the USB connect to the charger ,and also use usb connect to the camera unit ,then can charge.

C-2).How to make video Introduction:

   First step,you can adjust the angle of the camera unit below the camera .Then Continued pressing for 2-3 seconds on the "Switch" button , And the indicator will turn on the yellow light .

   The second step, if you want to make video ,you just Need to Continued pressing for 2-4 seconds on the "Video Recording" button ,then the indicator will Flicker 3 times and then turn off the light. This means the camera unit now start to make viodeo. At this time , you can paly your helicopter to make viodeo .

   When you want to save the video ,You need to take off your helicopter and press the "Video Recording" button again (This time you no need to Continued pressing for 2-4 seconds,just press the button in a short time is ok ) ,then the indicator will turn on the yellow light .This means you successfully save the VidEo on the memory card .

   The third step. if you want to continue make video .you just Repeat the second step .

if you want to close the camera unit ,just Continued pressing for 2-4 seconds on the "Switch" button ,then the indicator will turn off the light ,which means it successfully closed the camera unit .

   if you want open The camra unit again ,you just need repat the first step ,Continued pressing for 2-4 seconds on the "Switch" button .

   also if you open the camera unit ,and long time not use it ,it will automatically turn off . you need open it again by hands .

C-3).How to Take photo Introduction:

   This camera unit can be used to take photo by your hands .

   First ,you open the camra unit , just Continued pressing for 2-3 seconds on the "Switch" button , And the indicator will turn on the yellow light .

   The second , if you want to take photo ,you just Need to press the "Take photo" button , then you successfully take a photo .also the photo time you must set by you self .the instruction you can look the "C-6).Time Settings ":

C-4).Vedio Output:

A) Remove the camera unit from the helicopter

B) Turn off the camera unit(Power on/off button) ,then use the USB line to connect the camera unit ,and also use the USB line to connect to the Computer

C) Open your computer ,the removable hard disk can be found in a subdirectory. just go in it ,you can find the camera vedio or photo.

D) Also you can You can take down the memory card from the camera unit, then use a Reader to read the information of Memory card.

C-5).Charge method:

A)this camera has 200mah battery inside the camera unit,you can use USB line to connect the camera unit to the computer ,then can charge it ,usually need 40 minute to charge
Just at this time , if the indicator color is Yellow ,and Flicker, it means now the power is in the State of charging.
if the battery was charged full power ,the color of the indicator will Always yellow. and recently the version of the camera unit will not always yellow .so you just no need care about the indicator,just charge 40-50 minute is ok

B) Also when you are outdoor ,you can Put 1x 1.5V AA Battery into the charger( Need the high-capacity battery),then use the USB line connect the charger to the camera unit , then can charge.

C-6).Time Settings:

A)Turn off the camera unit(Power on/off button), Then open your computer ,go into the Disk root directory

B)Create a TAG.TXT file, enter the current time format as: 2009-01-01 10:10

C)After uninstalling the security cameras removable disk, reboot the camera, the time to complete the setup.

Many friends want to have a camera on their WL V913 helicopter,Now Dream come true!Click for details

Upgrade camera unit for WL V913,.Today only $39.99 usd ,Freeshiping worldwide
(Buy More Save More)
Usual price:$69 NO Free Shipping worldwide
Today only $39.99 Free Shipping worldwide


Copyright © 2012-2017 YouSky7- All rights reserved 123